AWD fitted

07 Sti minor pull (20mm spacer on stock BB's)

here's a stock Sti with BBS's

running a 20mm spacer on stock 225 tires minor rubbing issue.

stock ride height,

rear fenders were taped up, heated rolled with very minor pull

the car

the rub

the spacer (20mm)

the pull

thanks

OLD SKEWLS BMW (16x8 + 0)

Nasioc member, OLDSKEWL owns this car its the 2nd car I've rolled for him. He will be starting to roll fenders out of long beach. Hit him up.............

here's his DUMPED BMW 325 i think......

the lowness

low and on 16x8 +0 wheels on 205 tires.

rubbing was pretty severe on this car but we took care of it.

the lip tucked minor pull.

s14 (surprise bondo)

so here we have a honda s14 rolled in looking fly..............too fly

shortly found out it had body work and was re painted,

If y0u have bondo your paint WILL!! crack

on to the pics

before

after

pretty big pull, the owner plans to go lower about 2 inches lower.

the bondo

Acura RSX (17x9 +17)

this was a fun project that took some rolling trimming and coilover adjustment

we have a Acura rsx lowered and maxed out on Megan Coilovers

work 17x9+17

rubbin

Like all other hondas, Acura lips are easy to roll and the paint is very strong, can take alot of abuse

heres the stock lip, as you can see the rubbing causes the pull down on the fender, luckily in this situation there was no pant damage done.

after the roll

this car also reuared some bumper trimming, so I took a good 1/4 inch piece off the rear bumper mounting tap.

the end result.

view from the fronts.

view from the rears, you can see the fender pull

buddy Nasif checkin out my work

Miata, 15/8 et +15 sport max wheels

Today I had the chance to fit out a Miata wheels were 15x8 +15 all around lowerd on kyb agx and swift spring

rubbing was pretty bad not on sidewall but on tire tread. cool owner, Name was will

thanks man

yikes !

smooth and flat

right side

left side

the rubbing had pulled the front fender outward and cracked the paint doing so.

a little tape to help the outside paint from splitting.

finishing up, owner Will helping out

done

05 STI 0em wheels/ 15mm spacer issue

so I had the opportunity to fit a really well kept 05 sti, it had over fenders so I did my tape and roll technique on it, everything turned out gravy. modest roll/pull on all 4 corners.

fitment hks hipermax 2's coilovers, -2 degrees camber rear 15mm spacer on 08sti wheels

how it sits with the 15mm spacers on.

fenders before/after

stock untouched.

pulled

now the spacer gave us a slight problem

the 15mm didnt allow the sock wheels to seat properly, the studs came out too far, it would have worked perforctly on an aftermarket wheel.

example: enkei nt03-m